TURCLAB EN (European Norms) Standards test, analysis and certification services.
EN (Europeane Norm) is the abbreviation of European Standards. EN was created to ensure harmonization between standards in the European Union. In the EN working system, each country has a weighted voting right and the votes are not evenly distributed among the countries.
Goal; to eliminate problems arising from differences between national standards of member states.
EN standards apply at European level. They have been developed by the European standard organizations CEN and CENELEC, normally on the initiative of the EU. (CEN and CENELEC provide the framework for all national standards organizations in Europe.) CEN and CENELEC also share standards (CENELEC: Electrical and electronic engineering CEN: Mechanical systems). Today, many standards are being developed in IEC and ISO packages in cooperation with the EU through CEN and CENELEC. EN IEC or EN ISO standards are also the result of these efforts. Standards in Europe are subdivided into standards A, B and C.
EN 1: Oil burners with evaporative burners
EN 2: Fire classification
EN 3: Portable fire extinguishers
EN 19: Industrial valves - Marking of metal valves
EN 26: Gas-fired instantaneous water heaters for domestic hot water production
EN 40-1: Lighting columns - Part 1: Definitions and terms
EN 40-2: Lighting columns - Part 2: General requirements and dimensions
EN 40-3-1: Lighting columns - Part 3-1: Design and verification - Specification for characteristic loads
EN 40-3-2: Lighting columns - Part 3-2: Design and verification - Verification by tests
EN 40-3-3: Lighting columns - Part 3-3: Design and verification - Verification by calculation
EN 40-4: Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
EN 40-5: Lighting columns - Part 5: Requirements for steel lighting columns
EN 40-6: Lighting columns - Part 6: Requirements for aluminum lighting columns
EN 40-7: Lighting columns - Part 7: Requirements for fiber reinforced polymer composite lighting columns
EN 54: Fire detection and fire alarm systems
EN 71: Safety of toys
EN 81: Elevator safety
EN 115: Safety of Escalators and Moving Walks
EN 166: Personal eye protection. Specifications
EN 196: Cement test methods (10 pieces)
EN 197-1: Cement - Part 1: Composition, properties and conformity criteria of general cements
EN 197-2: Cement - Part 2: Conformity Assessment
EN 206-1: Concrete - Part 1: Properties, performance, fabrication and suitability
EN 207: Classification and specifications of filters and eye protection against laser
EN 208: Classification of eye protection filters for laser alignment
EN 228: Oil properties in automotive
EN 250: Respiratory equipment. Open circuit self contained compressed air diving device. Requirements, tests, marking
EN 280: Mobile lifting work platforms. Design calculations, Stability criteria, Construction, Safe Inspection and Tests
EN 287-1: "Qualification Test of Welders - Fusion Welding - Part 1: Steels" (2011)
EN 294: Safety of machinery; safety distances to prevent danger zones from being accessed by the upper limbs
EN 298: Automatic gas burner control systems for gas burners and gas burning devices with or without a fan
EN 336: Structural timber - Dimensions, permissible deviations
EN 338: Structural timber - Strength classes
EN 341: Personal protective equipment against falls from a height. Identifying devices
EN 352-2: 2002 standards on hearing protectors were revised. Safety requirements and testing, usually about earplugs.
EN 353-1: Personal protective equipment against falls from a height. Guided type fall arresters, including a rigid anchor
EN 353-2: Personal protective equipment against falls from a height. Guided type fall arresters including a flexible anchor line
EN 354: Personal protective equipment against falls from a height. Lanyards
EN 355: Personal protective equipment against falls from a height. Energy absorbers
EN 358: Personal protective equipment for lowering the height and determining the workplace. Positioning and seat belts in the workplace and work positioning strips
EN 360: Personal protective equipment against falling from a height. Retractable fall arresters
EN 361: Personal protective equipment against falls from a height. Full body harnesses
EN 362: Personal protective equipment against falls from a height. Connectors
EN 363: Personal protective equipment against falls from a height. Fall arrest systems
EN 374: Protective gloves against chemicals and microorganisms
EN 381: Protective clothing for users of chainsaws, eg. Trousers, jackets, gloves, boots / headgear holders.
EN 386: Adhesive laminated wood - Performance requirements and minimum production requirements
EN 388: Protective gloves against mechanical risks
EN 390: Adhesive laminated wood. Dimensions. Permissible deviations
EN 391: Glued laminated timber - Delamination tests of gluing lines
EN 392: Glued-laminated wood - Shear test of glue lines
EN 397: Specification for industrial safety helmets
EN 403: Respiratory protective devices for self-rescue. Filtering equipment with fire extinguishers. Requirements, tests, marking.
EN 408: Structural timber and glued laminated timber - Determination of some physical and mechanical properties
EN 417: Non-refillable metallic cartridges for liquefied petroleum gases
EN 420: Protective gloves. General conditions and test methods
EN 438: Decorative sheets of high pressure laminates (HPL) based on thermoset resins.
EN 440: "Welding consumables wire electrodes and alloy and fine grain steel welding for gas shielded metal arc welding - Classification" (1994)
EN 474: Earth moving machines. Safety. General Requirements
EN 450: Remove ash for concrete - Definitions, requirements and quality control
EN 518: Structural timber. Grading. Requirements for visual strength grading standards (replaced by EN 14081-1)
EN 519: Structural timber. Grading. Requirements for machine strength grade lumber and grading machines (replaced by EN 14081-1)
EN 567: Mountaineering equipment. Rope clamps. Security requirements and test methods
EN 590: Specification for automotive diesel
EN 694: Fire-fighting hoses. Semi-rigid hoses for stationary systems
EN 716: Children's beds and folding beds for home
EN 795: Protection against falling from a height. Anchor devices. Requirements and tests
EN 805: Water supply. Requirements for systems and components outside of buildings
EN 813: Personal protective equipment to prevent falls from a height. Belt sets
EN 837: Pressure connections
EN 840: Mobile waste bins.
EN 877: Cast iron pipes and fittings, their joints and accessories for draining from buildings. Requirements, test methods and quality assurance
EN 933-1: Test for geometric properties of aggregates - Part 1: determination of particle size distribution - Sieving method
EN 934-2: Additives for concrete, mortar and mortar - Part 2: concrete additives - Definitions and requirements
EN 962-1: Paragliding equipment - Paraglider - Part 1: Structural strength requirements and test methods
EN 962-2: Paragliding equipment - Paragliding - Part 2: Requirements and test methods for classifying flight safety features
EN 980: Symbols used for labeling medical devices
EN 1000-1899
EN 1010-1: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Common requirements
EN 1010-2: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Printing and polishing machines, including prepress machines
EN 1010-3: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Cutting machines
EN 1010-4: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Binding, paper turning and finishing machines
EN 1010-5: Machine safety - Safety requirements for the design and construction of printing and paper converting machines. Machines for the production of corrugated cardboard
EN 1069: 2 m high and more water slides
EN 1078: Helmets for cyclists with pedal and for skateboard and skate rink users
EN 1090: Execution of steel structures and aluminum structures (3 parts)
EN 1092: Flanges and connections. Circular flanges, PN specified for pipes, valves, fittings and accessories
EN 1168: Ready-mixed concrete products - Hollow floor slabs
EN 1176-1: Playground equipment. General safety requirements and test methods
EN 1177: Shock absorbing playground surface. Security requirements and test methods
EN 1325-1: Vocabulary of Value Management, Value Assessment and Functional Analysis
EN 1337: Structural bearings
EN 1399: Flexible floor coverings. Determining the resistance to bulging and burning cigarettes
EN 1401: Plastic piping systems for non-pressure underground drainage and sewage - Non-plasticized poly (vinyl chloride) (PVC-U)
EN 1496: Personal fall protection equipment. Rescue lifting devices
EN 1679: Reciprocating internal combustion engines: Compression ignition engines
EN 1815: Durable and textile floor coverings. Evaluation of static electrical tendency
EN 1891: Personal protective equipment that prevents falls from a height. Low stretch kernantin ropes
EN 1990-1999 (Eurocodes)
Main article: Eurocodes
EN 1990: (Eurocode 0) The basis of structural design
EN 1991: (Eurocode 1) Structures related operations
EN 1992: (Eurocode 2) Design of concrete structures
EN 1993: (Eurocode 3) Design of steel structures
EN 1994: (Eurocode 4) Design of composite steel and concrete structures
EN 1995: (Eurocode 5) Design of wooden structures
EN 1996: (Eurocode 6) Design of wall structures
EN 1997: (Eurocode 7) Geotechnical design
EN 1998: (Eurocode 8) Design of earthquake resistant structures
EN 1999: (Eurocode 9) Design of aluminum structures
EN 10000-10999
This product range includes almost exclusively CEN Standards for iron and steel.
EN 10002: Metallic Materials - Tensile Test
EN 10002-1: Test Method at Ambient Temperature
EN 10025: Hot rolled products of structural steels
EN 10025-1: Part 1: General technical delivery conditions
EN 10025-2: Part 2: Technical delivery conditions for non-alloy structural steels
EN 10025-3: Part 3: Technical delivery conditions for normalized / normalized rolled weldable fine grain structural steels
EN 10025-4: Part 4: Technical delivery conditions for thermomechanically rolled weldable fine grain structural steels
EN 10025-5: Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
EN 10025-6: Part 6: Technical delivery conditions for flat products of high strength structural steels in quenched and tempered conditions
EN 10027: Identification systems for steel [3]
EN 10204: Metallic products - Types of inspection documents
EN 10216: Seamless Steel Tubes for Pressure Purposes
EN 10216-1: Part 1: Non-alloy steel tubes with specified room temperature properties
EN 10216-2: Part 2: Non-alloy and alloy steel tubes with high temperature properties
EN 10216-3: Part 3: Alloy fine grain steel tubes
EN 10216-4: Part 4: Non-alloy and alloy steel tubes with low temperature properties
EN 10216-5: Part 5: Stainless steel pipes
EN 10217: Pressure welded steel pipes
EN 10217-1: Part 1: Non-alloy steel tubes with specified room temperature properties
EN 10217-2: Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-3: Part 3: Alloy fine grain steel tubes
EN 10217-4: Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
EN 10240: Internal and / or external protective coating for steel pipes - specification for hot-dip galvanized coatings applied in auto plants
EN 11000-49999
EN 12102: Air-conditioners with electric compressors, liquid chilling packages, heat pumps and dehumidifiers for underfloor heating and cooling - Measuring airborne noise - Determination of sound level
EN 12103: Flexible floor coverings - Agglomerated cork pads - specification
EN 12104: Resilient floor coverings - Cork floor coverings - Specification
EN 12105: Resilient floor coverings - determination of moisture content of agglomerated composition cork
EN 12199: Flexible floor coverings. Specification for homogeneous and heterogeneous embossed rubber floor coverings
EN 12221: Exchange Unit for Home Use
EN 12246: Quality classification of wood used in pallets and packages
EN 12255: Wastewater treatment plants
EN 12255-1: Part 1: General construction principles
EN 12255-2: Part 2: Performance requirements of raw wastewater pumping installations
EN 12255-3: Part 3: Pre-treatment
EN 12255-4: Part 4: Primary settlement
EN 12255-5: Part 5: Lagooning processes
EN 12255-6: Part 6: Activated Sludge Treatment
EN 12255-7: Part 7: Biological fixed film reactors
EN 12255-8: Part 8: Treatment and storage of sludge
EN 12255-9: Part 9: Odor control and ventilation
EN 12255-10: Part 10: Safety principles
EN 12255-11: Part 11: General data required
EN 12255-12: Part 12: Control and automation
EN 12255-13: Part 13: Chemical Treatment - Treatment of wastewater by precipitation / flocculation
EN 12255-14: Part 14: Disinfection
EN 12255-15: Part 15: Measurement of oxygen transfer in fresh water in aeration tanks of activated sludge plants
EN 12255-16: Part 16: Physical (mechanical) filtration
EN 12277: Climbing and climbing harnesses
EN 12281: Printing and business paper. Copy paper requirements.
EN 12345: Source. Multilingual terms for illustrated welded joints
EN 12492: Helmets for mountaineering
Small wastewater treatment systems up to EN 12566: 50 PT
EN 12566-1: Part 1: Prefabricated septic tanks
EN 12566-2: Part 2: Soil penetration systems
EN 12566-3: Part 3: Packaged and / or on-site assembled domestic wastewater treatment plants
EN 12566-4: Part 4: Septic tanks assembled in situ from prefabricated kits
EN 12566-5: Part 5: Preformed Waste Filtering Systems
EN 12566-6: Part 6: Prefabricated treatment units for septic water
EN 12566-7: Part 7: Prefabricated tertiary treatment units
EN 12572: Artificial climbing structures
EN 12600: Classification of Resistance of Glass Structure
EN 12663: Railway applications - Structural requirements of railway vehicle bodies
EN 12797: Brazing - destructive testing of brazed joints
EN 12799: Brazing - Non-destructive testing brazed joints
EN 12810: Facade scaffolds made of prefabricated parts
EN 12811: Temporary work machines
EN 12841: Personal fall protection equipment. Rope transport systems. Rope adjustment devices
EN 12890: Molds, mold equipment and core boxes for the production of sand molds and sand cores
EN 12952: Water Pipe Boilers and Auxiliary Installation
EN 12973: Value Management
EN 12975-1: Thermal solar systems and components - Solar collectors
EN 13133: "Brazing-Brazer approval" (2000)
EN 13145: Railway applications - Rails - Wooden sleepers and carriers
EN 13146: Railway applications - Track - Test methods for fastening systems
EN 13162: 2013-03: Thermal insulation products for buildings - Factory made mineral wool (MW) products
EN 13204: Double acting hydraulic rescue device for fire and rescue service. Safety and performance requirements [4]
EN 13300: quality and classification of (interior) wall paint
EN 13402: Dimensions of clothing
EN 13432: Compostable and biodegradable packaging
EN 13445: Obsolete pressure vessels
EN 13480: Industrial metal pipes
EN 13501: Fire classification of construction products and building elements
EN 13537: Temperature ratings for sleeping bags
EN 13594: 2002: Protective gloves for professional motorcycle riders. Conditions and test methods
EN 13595-1: 2002: Protective clothing for professional motorcycle riders. Jackets, trousers, and one-piece or split suits. General Requirements
EN 13595-2: 2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one-piece or split suits. Test method for determining impact abrasion resistance
EN 13595-3: 2002: Protective clothing for professional motorcycle riders. Jackets, trousers, and one-piece or split suits. Test method for determination of bursting strength.
EN 13595-4: 2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one-piece or split suits. Test methods for determining impact shear resistance
EN 13612: Performance evaluation of in-vitro diagnostic devices
EN 13634: 2002: Protective footwear for professional motorcycle riders. Conditions and test methods
EN 13640: Stability testing of in vitro diagnostic reagents
EN 13757: Communication system for measuring devices and remote reading of meters (Meter-Bus)
EN 13940: 2016: Concept systems that support continuity of care
EN 14081-1: Timber structures - Strength grade structural timber with rectangular cross section - Part 1: General requirements
EN 14081-2: Timber structures - Strength graded structural mass of rectangular section - Part 2: machine rating; Additional requirements for the starting type test.
EN 14081-3: Timber structures - Strength grade structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control.
EN 14081-4: Timber structures - Strength grade structural timber with rectangular cross section - Part 4: Machine classification; Grader settings for machine-controlled systems.
EN 14214: Pure biodiesel standard
EN 14511: Air conditioners, liquid chilling packages and heat pumps with electric compressors for underfloor heating and cooling
EN 14904: Surfaces for sports fields. Indoor areas for multi-sports use. Specification
EN 14988-1: 2006: Children's High Chairs. Part 1: Security requirements
EN 14988-2: 2006: Children's High Chairs. Part 2: Test methods
EN 15251: Indoor air parameters for the design and evaluation of the energy performance of buildings, indoor air parameters, thermal environment, lighting and acoustics
EN 15531: Service Interface for Real Time Information
EN 15595: Railway applications - Braking - Wheel skid prevention equipment [5]
EN 15714: Industrial Valves - Actuators
EN 15744: Film identification - Minimum set of metadata for cinematographic works
EN 15838: Customer Contact Centers - Conditions for service provision
EN 15883: Washer disinfectors
EN 15907: Film identification - Increasing the interoperability of metadata - Element sets and structures
EN 16001: Energy management systems; withdrawn, replaced by ISO 50001.
EN 16034: Industrial, commercial, garage doors and pedestrian doors consisting of openable windows. Product standard, performance characteristics. Fire Resistant and / or Smoke Control Features
EN 16114: Management consulting services
EN 16247: Energy audits
EN 28601: Data elements and forms of exchange; exchange of information; representation of dates and times
EN 45502-1: Active implantable medical devices - Part 1: General requirements for safety, marking and information to be provided by the manufacturer
EN 45545: Railway applications. Fire protection in rolling stock.
EN 45545-1: Railway applications. Fire protection in rolling stock. General
EN 45545-2: Railway applications. Fire protection in rolling stock. Requirements for the fire behavior of materials and components
EN 45545-3: Railway applications. Fire protection in rolling stock. Fire resistance requirements for fire barriers
EN 45545-4: Railway applications. Fire protection in rolling stock. Fire safety requirements for rack stone design
EN 45545-5: Railway applications. Fire protection in rolling stock. Fire safety requirements for electrical equipment, trolley buses, road guide buses and magnetic levitation vehicles
EN 45545-6: Railway applications. Fire protection in rolling stock. Fire control and management systems
EN 45545-7: Railway applications. Fire protection in rolling stock. Fire safety requirements for flammable liquid and flammable gas installations
EN 50000-59999 (CEN specific, non-IEC electrical standards)
EN 50022: 35 mm top hat mounting rails for low voltage control panel (DIN rail)
EN 50075: Europlug
EN 50090: Home and Building Electronics Systems (KNX / EIB)
EN 50102: Degree of protection against external mechanical impacts by electrical equipment enclosures
EN 50119: Railway applications - Fixed installations: Electric towing overhead lines for railways
EN 50121: Railway applications - Electromagnetic compatibility
EN 50121-1: Railway applications - Electromagnetic compatibility Part 1: General
EN 50121-2: Railway applications - Electromagnetic compatibility - Part 2: extension of the entire railway system to the outside world
EN 50121-3-1: Railway applications - Electromagnetic compatibility - Part 3- 1: rolling stock - Train and complete vehicle
EN 50121-3-2: Railway applications - Electromagnetic compatibility - Part 3- 2: Railcar - Apparatus
EN 50121-4: Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of signaling and telecommunications equipment
EN 50121-5: Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and devices
EN 50122: Railway applications - Stationary installations
EN 50122-1: Railway applications - Fixed installations - Electrical safety, earthing and return circuit - Part 1: Protective provisions against electric shock
EN 50122-2: Railway applications - Fixed installations - Part 2: Protective provisions against the effects of voltage currents caused by DC traction systems
EN 50122-3: Railway applications - Fixed installations - Electrical safety, earthing and return circuit - Part 3: Interaction of AC and dc traction systems
EN 50123: Railway applications - Stationary installations - DC switchgear installations
EN 50124: Railway applications - Insulation coordination
EN 50125-2: Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations
EN 50125-3: Railway applications - Environmental conditions for equipment - Part 3: Equipment for signaling and telecommunications
EN 50126: Railway applications - Reliability, availability, maintenance and safety (RAMS) specification and representation
EN 50128: Railway applications - Communication, signaling and processing systems
EN 50129: Railway applications - Communication, signaling and processing systems - Safety-related electronic systems for signaling
EN 50130: Alarm systems - Electromagnetic compatibility and Environmental test methods
EN 50131: Alarm systems - Intrusion and standby systems
EN 50136: Alarm systems - Alarm transmission systems
EN 50155: Railway applications - Railway equipment
EN 50157: Internal and Similar Electronic Equipment Connection Requirements (Section = AV.link)
EN 50159: Railway applications - Communication, signaling and processing systems - Safety-related communication in transmission systems
EN 50159-1: Railway applications - Communication, signaling and processing systems - Part 1: Safety-related communication in closed transmission systems
EN 50159-2: Railway applications - Communication, signaling and processing systems - Part 2: Safety-related communication in open transmission systems
EN 50163: railway applications provide the tension of traction systems
EN 50178: Electronic equipment used in electrical installations
EN 50262: Metric cable glands
EN 50267: Corrosive Gases
EN 50522: Earthing of power installations exceeding 1 kV ac
EN 50308: Wind Turbine - Protective Measures - Design, operation and maintenance requirements
EN 50325: Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces
EN 50436: Alcohol lock
EN 50525: Low voltage energy cables; The merger of HD 21 and HD 22.
EN 50600: Information technology - Data center facilities and infrastructure
EN 55014: Electromagnetic compatibility - Requirements for household appliances, electrical appliances and similar devices
EN 55022: Information technology equipment. Radio distortion properties.
EN 55024: Information technology equipment. Immune properties
EN 60000-69999 (CEN versions of IEC standards)
Main article: List of IEC standards
EN 60065: Audio, Video and similar electronic equipment - Safety requirements.
EN 60950-1: Information technology equipment - Safety - Part1: General requirements
EN 60950-21: Information technology equipment - Safety - Part21: Remote power supply
EN 60950-22: Information technology equipment - Security - Part22: Outdoor mounted equipment
EN 60950-23: Information technology equipment - Security - Part23: Big data storage equipment
EN 61000-1-2: Electromagnetic compatibility (EMC). General. Methodology to ensure the functional safety of electrical and electronic systems, including equipment related to electromagnetic phenomena
EN 61000-1-3: Electromagnetic compatibility (EMC). General. Effects of high altitude EMP (HEMP) on civilian equipment and systems
EN 61000-1-4: Electromagnetic compatibility (EMC). General. The historical rationale for the limitation of power frequency governed harmonic current emissions from equipment in the frequency range up to 2 kHz
EN 61000-1-5: Electromagnetic compatibility (EMC). General. High power electromagnetic (HPEM) effects in civil systems
EN 61000-1-6: Electromagnetic compatibility (EMC). General. Guidelines for evaluating measurement uncertainty
EN 61000-2-2: Electromagnetic compatibility (EMC). Environment. Low frequency conducted disturbances and compatibility levels for signal transmission in general low voltage power supply systems
EN 61000-2-4: Electromagnetic compatibility (EMC). Environment. Compatibility levels for low frequency transmitted disturbances in industrial facilities
EN 61000-2-9: Electromagnetic compatibility (EMC). Environment. Definition of HEMP environment. Radiation disturbance. Basic EMC publication
EN 61000-2-10: Electromagnetic compatibility (EMC). Environment. Definition of HEMP environment. Transmitted discomfort
EN 61000-2-12: Electromagnetic compatibility (EMC). Environment. Low frequency conductor disturbances and compatibility levels for signal transmission in common medium voltage power supply systems
EN 61000-3-2: Electromagnetic compatibility (EMC). Borders. Harmonic current emission limits (equipment input current up to and including 16 A per phase)
EN 61000-3-3: Electromagnetic compatibility (EMC). Borders. Limitation of voltage changes, voltage fluctuations and vibrations in general low-voltage supply systems for devices with a nominal current akım 16 A per phase, not subject to conditional connection
EN 61000-3-11: Electromagnetic compatibility (EMC). Borders. Limitation of voltage changes, voltage fluctuations and vibrations in common low voltage supply systems Equipment with a rated voltage current ≤ 75 A and subject to conditional connection
EN 61000-3-12: Electromagnetic compatibility (EMC). Borders.
EN 61000-4-1: Electromagnetic compatibility (EMC). Test and measurement techniques. Overview of the IEC 61000-4 series
EN 61000-4-2: Electromagnetic compatibility (EMC). Test and measurement techniques. Electrostatic discharge immunity test. Basic EMC publication
EN 61000-4-3: Electromagnetic compatibility (EMC). Test and measurement techniques. Radiated radio frequency, electromagnetic field immunity test
EN 61000-4-4: Electromagnetic compatibility (EMC). Test and measurement techniques. Electrical fast transient / burst immunity test
EN 61000-4-5: Electromagnetic compatibility (EMC). Test and measurement techniques. Surge immunity test
EN 61000-4-6: Electromagnetic compatibility (EMC). Test and measurement techniques. Immunity to disturbances transmitted by radio frequency fields
EN 61000-4-7: Electromagnetic compatibility (EMC). Test and measurement techniques. General information about harmonic and interharmonic measurements and instrumentation, related power supply systems and equipment
EN 61000-4-8: Electromagnetic compatibility (EMC). Test and measurement techniques. Power frequency magnetic field immunity test. Basic EMC publication
EN 61000-4-11: Electromagnetic compatibility (EMC). Test and measurement techniques. Immunity tests against voltage dips, short interruptions and voltage variations
EN 61000-4-12: Electromagnetic compatibility (EMC). Test and measurement techniques. Oscillating waves immunity test. Basic EMC publication
EN 61000-4-13: Electromagnetic compatibility (EMC). Test and measurement techniques. Harmonics and interharmonics including the grid signal at the AC power connection point, low frequency immunity tests
EN 61000-4-14: Electromagnetic compatibility (EMC). Test and measurement techniques. Voltage surge immunity test for equipment whose input current does not exceed 16 A per phase
EN 61000-4-15: Electromagnetic compatibility (EMC). Test and measurement techniques. Flicker meter. Functional and design features. Basic EMC publication
EN 61000-4-16: Electromagnetic compatibility (EMC). Test and measurement techniques. Test for immunity to conductive, common mode disturbances in the frequency range 0 Hz to 150 kHz
EN 61000-4-17: Electromagnetic compatibility (EMC). Test and measurement techniques. DC input power port fluctuation in immunity test
EN 61000-4-18: Electromagnetic compatibility (EMC). Test and measurement techniques. Damped oscillating wave immunity test
EN 61000-4-19: Electromagnetic compatibility (EMC). Test and measurement techniques. Test immunity to conductive, differential mode disturbances and signaling on AC power ports in the frequency range of 2 kHz to 150 kHz
EN 61000-4-20: Electromagnetic compatibility (EMC). Test and measurement techniques. Emission and immunity tests in transverse electromagnetic (TEM) waveguides
EN 61000-4-21: Electromagnetic compatibility (EMC). Test and measurement techniques. Test methods of the reverberation chamber
EN 61000-4-22: Electromagnetic compatibility (EMC). Test and measurement techniques. Radiation emission and immunity measurements in fully anechoic chambers (FAR)
EN 61000-4-23: Electromagnetic compatibility (EMC). Test and measurement techniques. Test methods for protective devices for HEMP and other radiated disturbances
EN 61000-4-24: Electromagnetic compatibility (EMC). Test and measurement techniques. Test methods for protective devices for HEMP were inconvenient. Basic EMC publication
EN 61000-4-25: Electromagnetic compatibility (EMC). Test and measurement techniques. HEMP immunity test methods for equipment and systems
EN 61000-4-27: Electromagnetic compatibility (EMC). Test and measurement techniques. Unbalance, immunity test for equipment whose input current does not exceed 16 A per phase
EN 61000-4-28: Electromagnetic compatibility (EMC). Test and measurement techniques. Variation of power frequency, immunity test for equipment whose input frequency does not exceed 16 A per phase
EN 61000-4-29: Electromagnetic compatibility (EMC). Test and measurement techniques. Voltage dips, short interruptions and voltage variations on dinputput power ports. Immunity tests. Basic EMC Broadcast.
EN 61000-4-30: Electromagnetic compatibility (EMC). Test and measurement techniques. Test and measurement techniques. Power quality measurement methods
EN 61000-4-34: Electromagnetic compatibility (EMC). Test and measurement techniques. Immunity tests for voltage drops, short interruptions and voltage variations in mains current of more than 16 A per phase
IEC 61000-5-1 Electromagnetic compatibility (EMC). Installation and mitigation rules. General Considerations. Basic EMC publication
EN 61000-5-5 Electromagnetic compatibility (EMC). Installation and mitigation rules. The features of the protective devices for HEMP bothered. Basic EMC publication
EN 61000-5-7 Electromagnetic compatibility (EMC). Installation and mitigation rules. Degrees of protection by enclosures against electromagnetic disturbances (EM code). Degrees of protection against electromagnetic disturbances provided by enclosures (EM code)
EN 61000-6-1 Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light-industrial environments
EN 61000-6-2 Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments
EN 61000-6-3 Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
EN 61000-6-4 Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments